Milling

Monolithic Milling Cutters

  • Geometrie a povlaky fréz pro frézování široké škály materiálů od nízkouhlíkových ocelí a slitin hliníku až po slitiny titanu
  • Různé materiály fréz – HSS, TK, PM
  • Ekonomická řada pro obrábění nízkouhlíkových ocelí
  • Řada fréz pro obrábění ocelí kalených až na 70 HRC
  • Monolitní tvrdokovové frézy pro výrobu závitů

X–Speed

  • Hot innovation
  • Shank cutters with variable spiral angle and roughing profile
  • For maximum productivity at slotting
  • Extreme high feeds and material removals per minute

Frézy speciálně vyvinuté pro frézování drážek v ocelích a litině. Fréza má šroubovici s proměnlivým úhlem stoupání a hrubovací profil. To umožňuje dosahovat extrémních hodnot posuvu.

X5070

  • Series of monolithic milling cutters for machining of hardened steels with the hardness upto 70 HRc
  • Nano-grained carbide, accurate geometry, special coating
  • Extremely high resistance, favourable price
  • Complete assortment of shank milling cutters from diameter of 0,1 to 25 mm

Precizní geometrie, nanokompozitní povlak, nanozrnný slinutý karbid. To jsou tři základní faktory, které vám umožní frézovat oceli s tvrdostí až 70 HRC s použitím bezkonkurenčních řezných podmínek

High-feed shank milling cutters

  • High-feed shank milling cutters for alloyed steels and tool steels with hardness upto 68 Hrc
  • Feeds upto 15000 mm/min
  • Diameters from 2 to 12 mm
  • Productive roughing of general surfaces

Různé typy rychloposuvových fréz. Extrémní produktivita při frézování oceli, litiny nebo kalených ocelí s tvrdostí až 70 HRC

X–Power

  • Universal series of shank milling cutters for machining of steel and cast iron
  • 36 various types of milling cutters – corner, spherical end, with necks, ...
  • coated, nano-grained HM with the grain size<0,4 µm, diameters from 0,4 to 25 mm

K2

  • Economic series for machining of low-carbon and medium alloyed steels
  • Various types of milling cutters – corner, spherical end, with necks, milling cutters with roughing profile, ...
  • Very convenient prices
  • Diameters from 0,4 to 20 mm

V7

  • Shank milling cutters with variable spiral angle for milling of rust-proof steels, titanium alloys, Inconel and steels upto 40 Hrc
  • Nano-grain HM, AlTiN coating, 4 and 5 edges, from diameter 3 to 25 mm
  • Multiple higher productivity and durability, increased resistance against

Jet - Power

  • Special geometry for rust-proof steels and alloys of titanium, HRSA and steels upto 45 Hrc
  • Spiral angle 35°, 45°, 50°, diameters from 1 to 25 mm
  • Various types of milling cutters – Corner, spherical milling cutters with roughing profile

Alu - Power

  • Special geometry for Al-alloys and alloys of non-ferrous metals
  • Slotting cutters with corner radius, spherical, roughing ones
  • Diameters from 1 to 32 mm

D-Power

  • Milling cutters with diamond coating for machining of graphite and other abrasive materials
  • Slotting cutters with radius, spherical
  • Diameters from 0,1 to 20 mm

Tank Power

  • Milling cutters of sintered HSS
  • Extreme edge resistance, productive coating
  • Complete shape and dimensional range of shank mills with diameter from 1 to 25 mm
  • Excellent output and durability at non-stable machining and on older machines

Řada fréz fréz ze spékaných ocelí kombinuje vlastnosti slinutého karbidu a HSS ocelí. Díky tomu nachází uplatnění při produktivním frézování na starších strojích a při hrubovacích operacích

HSS

  • Shank, shell-type, disk milling cutters, dovetail and T-slot milling cutters
  • Shank mills from diameter 1 to 50 mm, disk type upto diameter 200 mm
  • Roughing, slotting, spherical, chamfers

Modular systems

  • Modular corner milling cutters, spherical, quick-feed, with roughening profile
  • Diameters from 2 to 20 mm
  • Diamond coating for graphite and abrasive materials

Milling Cutters with Soldered Edges of HM

  • Very good price/output ratio
  • Wide range of shapes and dimensions
  • Shell-type, disk, shank milling cutters – straight, Morse and ISO shanks
  • Dovetail and T-slot milling

Ekonomicky výhodné řešení hlavně při dokončování ploch bokem frézy

Hard Metal Technical Mills

  • Micro-grained carbide– high durability
  • Standard assortment 13 shapes and 4 cuts, Diameters from 1,5 to 25 mm
  • High durability and quality surface are subjected to high speed
  • Replace classical HSS and grinding points

Mills with indexable inserts

Face Milling Cutters

  • Wide range of face milling cutters of various types
  • Octagonal inserts with positive geometry for high output capacity and surface quality
  • Milling cutter of series
    – With double-sided inserts
    – Double number of edges
  • Square inserts with positive geometry
    and angle 45°, for excellent surface
    quality

Corner Milling Cutters

  • Wide offer of corner milling cutters of various types
  • Series with inserts 17 and 11 mm from diameter 10 to 160 mm,
  • series with insert 7mm, high number of teeth For example: Diameter 12 – 2 teeth, Dia. 25 – 7 teeth, ...
  • series with double-sided inserts – Double number of edges
  • Milling cutters with inserts of series APxx – Various types of milling cutters with diameter from 10 to 500 mm

Machining of Moulds

  • spherical mills with distribution of cooling fluid along the edge, micro-grained carbide, 6 shapes of inserts, steel or HM shanks
  • Shank- or shell-type milling cutters with round inserts Dia. from 8 to 125 mm, wide range of inserts
  • Complete range of shapes and dimensions for monolithic milling cutters with the machining possibility upto the hardness of 70 Hrc

High-Feed Milling Cutters

  • Series of milling cutters for single- or double-sided inserts – Upto 6 cutting edges, low machining costs
  • High feed per tooth, minimum radial component of cutting force – resistance against vibrations even at great extension
  • Optimum usage of machine output, great material removal, quiet running

Milling Cutters with Inserts in Spiral

  • Top series of „Corns“
  • Standard diameters D=32 to 80 mm
  • Body design with exchangeable face adapter
  • Shanks weldon, HM, Morse
  • Shell-type versions
  • Other types of inserts and diameters on request
  • Extremely high productivity and very low cutting resistance, suitable also for machines with low output

Heavy Roughing

  • Milling cutters diameters upto 500 mm, chip depth from 17 to 25 mm
  • High durability inserts at milling of crust of castings and forgings
  • Material removal 2500 cm3/min and more according to machine output
  • Various types of milling cutters and inserts for most demanding applications
  • Tangential milling cutters

Milling of Aluminium Alloys

  • Duralumin bodies of milling cutters for high-speed machining
  • Adjustable inserts for excellent surface of the workpiece
  • inserts of polished HM, PCD or with soldered diamond cutting edges

Milling of Cast Iron

  • Wide range of inserts – tungsten carbides, ceramic, CBN
  • Special chip formers ensuring high stability even at interrupting cut
  • Tangential inserts for heavy and productive machining of cast iron
  • Cubic inserts with 8 cutting edges – excellent price per 1 edge

Finish Milling

  • Milling cutters with adjustable cartridges (e.g. Ra 0,22 at v = 470 m/min, ap = 0,1 mm – weldment 11523)
  • Feeds 600 mm/min and more
  • Special tool milling cutters with inserts and monolithic milling cutters with 45° spiral, neck milling cutters

Side Cutters

  • Width from 1,6 to 35 mm, diameters from 50 to 1050 mm
  • Milling cutters with adjustable width
  • Milling cutters with five-edge inserts
  • Wide range of HSS milling cutters and mulling cutters with soldered edges
  • Disk milling cutters for cutting of tubes and bars

Milling of Grooves and Slots

  • Disk and shell-type mills with inserts
  • Shank milling cutters with exchangeable inserts for internal grooves and slots from diameter 10 mm
  • Milling cutters for dovetail and T-slots
  • milling cutters with inserts for machining of tooth gashes

Tento web používá k poskytování služeb a analýze návštěvnosti soubory cookie. Používáním tohoto webu s tím souhlasíte.

Další informace